|
|
| Ceramic Heating Board/Panel and Ceramic Heating Pipe |
|
|
Model：
Describe：
|
|
Concept of Ceramic Heating Board/Panel and Ceramic Heating Pipe:
On its tailor-made surface, ceramic heating board/panel ,ceramic heating pipe(or insulated stainless steel board/panel) adopts ultrafine resistance alloy material added to peculiar and technical inorganic film-former to form zonal conductive resistance passages like printed circuit, through different techniques such as printing, sinter and envelopment. When it is electrified, the unit gives out infrared heat and heat itself through transmition.
Performance Features of Ceramic Heating Board/Panel and Ceramic Heating Pipe:
1.The element produces no open flame and oxygenation when it works. The using life is 50 times more than ordinary electric heating wire element.
2.The element adopts high quality ceramic board/panel or tub as carrier and possesses a good capacity to bear cold or heat impact, safe and reliable.
3.The element surface can provide good heat conductibility and high temperature which can reach 300℃
4.The element can provide high power density, fast increased temperature, small thermal capacity and high thermal efficiency.
5.The element possesses a good capacity of resistance to cold or heat impacting. To be directly placed into the water of 20℃±5℃ when it is in the high temperature of 500℃,the element will still keep in good condition and not crack under three times of back and forth strike.
Application of Ceramic Heating Board/Panel and Ceramic Heating Pipe:
•Electric warmer humidifying pipe
•Physiatrics instrument heating slice, pipe
•Perming board/panel •Assembled ceramic honeycomb •Steam heater
Specification of Ceramic Heating Board/Panel and Ceramic Heating Pipe:
1.Electricity Capacity: 3750V／1min0.5mA, no phenomena of breakdown and flashover;
2. Long using life (≤300℃ controlled dry burning) ≥20000 hours;
3..Power tolerance: ±10%;
4. Power consistency (effective heating area of film, its power consistency is related to the structure of entire machine) ≤ 1.5W／CM²; forced cooling≤15W/CM²;
5. Supply voltage: AC or DC;
6. Element dimension: Non-standard element can be made according to the customer’s requirement.
|
|
